AudioPressBox APB-216 C
Manual, User Guide & Video
APB-216 C Manual
APB - Video Guide
APB-216 C User Guide
1. TURN THE UNIT ON
Turn the unit ON by turning the Power switch to ON position. Green LED above the switch will indicate that the APB is powered up.
2. CONNECTING DEVICES TO INPUT
2.1 How to connect a condenser microphone
- Connect the XLR cable from microphone to input
- Turn the Mic/Line switch to position MIC
- Turn the Phantom switch to position ON
- Adjust gain to „OK“ level while speaking to microphone
- The Phantom diod is glowing red and when talking to microphone the signal level is green on „OK“
2.2 How to connect a mixing console
- Turn the Phantom switch to position OFF
- Turn the Mic/Line switch to position LINE
- Connect the XLR cable from mixing console to input
- Adjust gain to „OK“ level while speaking to microphone
- The Phantom diod is OFF and when talking to microphone the signal level is green on „OK“
3. CONNECTING DEVICES TO OUTPUTS OF APB-216 C
3.1 How to connect MIC level devices
- Switch the Mic/Line switch (above output) to position MIC
- Connect XLR cable from your device to any of the outputs of APB-216 C
3.2 How to connect LINE level devices
- Switch the Mic/Line switch (above output) to position LINE
- Connect XLR cable from your device to any of the outputs of APB-216 C